|
PRICE.
SERVICE.
SELECTION.
AT
WORLDWIDE
INVESTMENTS
IT'S
GUARANTEED
| |
|
| With
it's unique 18 gauge fully seamless
working surface, the Model 2004 offers much more
flat accessible working area than other carts.
Any entrepreneur that's
been in the vending business for a while will tell you then if you don't
have a large flat working space, you won't be able to handle the
volume required with large crowds.
|
NEW
MODEL 2004
(click on cart for larger image)
Schematics
|
4
or 5 Heated Pans will give you the ability to serve more than 150
dogs in just ONE hour.
The 2004 model's standard soft food storage area with sliding plexi-glass doors
offers more storage than other carts.
The built in
EXTRA LARGE Fully
Insulated Soda Bin holds up to 100 cans of ice cold soda.
|
Other carts
cannot compare to the quality and conveniences of the Model 2004.
The carts seamless
18 gauge working surface is constructed with laser cut and
fully rolled edges.
Not only will
the crowds appreciate the quality, but your health inspector will also
prefer the detailed construction. Don't take our word for
it! Ask your health inspector which cart is better - seamless
working surfaces with fully rolled edges or angled edges with catch all
seams that give bacteria a place to live and breed.
Since we
carry the best selling carts in the world for over 30 years,
we already know the answer. Our carts pass more health codes than
all other affordable carts in the market.
-
Dual Stage Propane
Regulators
-
18 gauge first
quality stainless steel on working surfaces, rolled edges for a seamless top
working area. (most of our competitors still use a cheaper, thinner 22-24
gauge metal or composite surface)
-
Hot and Cold water
hand sink standard on every cart. Additional sinks available.
-
Burners are
specifically designed for use on commercial vending carts. Cast iron
construction. Individual controls. (We do not use gas grill type
burners)
-
Gas Supply lines
are 100% Copper. (No black rubber hose)
-
All components of
the water supply system are approved for potable water.
-
Waste tank is 15%
larger in capacity than the fresh water supply.
-
1 year limited
parts and labor warranty.
-
Our carts have been
sold and approved by health departments worldwide.
-
Toll Free telephone
service for customer or health department questions. We will work with
you or your health department representative to make sure you are purchasing
a vending cart you can use. 1-800-267-6193
|
LISTED
BELOW ARE THE EXACT SPECIFICATIONS FOR OUR MODEL 2004 CART.
|
Water
System:
|
Gravity
fed vented system: A five gallon fresh water holding tank is mounted
above the soft food storage area on the front of the cart. The
water supply tank is approved for potable water and comes with a vented
fill cover. The water is delivered from the holding tank to the
sink using tubing that is approved for use in potable water systems..
|
Waste Water Tank:
|
The waste water
tank meets the requirements most health departments require, by being at
least 15% larger than the fresh water supply tank. The waste water
tank is removable for efficient dumping and cleaning.
|
Hot Water Supply:
|
On Demand
System: The hot water for the hand sink is heated by direct
transfer in the propane burner area of the cart. This system
supplies on demand hot water by heating the water as it passes through a
direct flame in the transfer area.
|
Gas Supply System:
|
Bottled
Propane: The propane is stored in a standard 20lb. propane
tank. Gas is supplied to the burner area using copper
tubing. A dual stage propane regulator is mounted on the outside
of the cart before the lines pass into the cart.
|
Burner System:
(standard cart) |
The burners are
made of cast iron, contain no dangerous pilots and are specifically
designed for use on hot dog vending carts. Two individually
controlled burners are supplied with the standard Model 2004. A
galvanized protective firebox is built around the burner area. |
THE
ACTUAL MEASUREMENTS OF A MODEL 2004 HOT DOG CART
|
| Working
Surface: |
18
Gauge stainless steel with rolled edges for a seamless working
surface. Laser cut for precision with no rough edges (most of our
competitors still use cheaper, thinner 22-24 gauge metals or aluminum
composites)
|
| Towing
Hitch: |
1
7/8" Ball receiver |
| Trailer
Wiring Hook-up: |
Standard
4 pin (flat) |
| Underneath
Storage Area: |
40"
wide x 10" high x 23 1/2" length |
| Sink
Cabinet: |
10
1/2" wide x 9 3/4" length |
| Sink
Basin: |
9
1/2" wide x 5 3/4" length x 4" deep |
| Top
of Faucet to Drain: |
10
1/4" |
| Bottom
rear of cart to ground: |
14" |
| Push
Bar: |
4
1/4" to rear of cart - constructed of 1" angle iron |
| Burner
Area: |
29
1/4" wide x 13 1/2" length |
|
Free
Mustard
& Ketchup
